Forum Discussion

Fiko_29923's avatar
Fiko_29923
Icon for Nimbostratus rankNimbostratus
Jun 14, 2011

configuring LTM VE in network

Hi, I want to ask regarding ltm ve configuration for using in network

 

 

I try to setup big-ip with host only adapter for mgmt port and using 1 vlan 1.1 setup at bridge mode. By doing this I manage to have setting up virtual server in within the subnet 255.0.0.0. But by using this I can't access big-ip from another machine.

 

 

I have created an application to control big-ip like setting up virtual servers, rules, etc in a server. So I need big-ip to be accessible from another machine. Anyone can tell me how to do that? Because when I try to set big-ip mgmt to bridge mode and use ip address on the same subnet, i cannot assign ip address as it has the same subnet with mgmt ip address.

 

 

for information,

 

IP address for server which have application to control big-ip is 202.172.230.136

 

Virtual Server 10.0.0.12

 

1.1 VLAN self ip 10.0.0.3

 

machine which running

 

all above within the subnet 255.0.0.0

 

LTM VE mgmt ip 192.168.138.128

 

8 Replies

  • Hi Fiko,

     

     

    If you only have one network that's reachable off the host, I'd set the mgmt port to use a host only adapter and use a self IP to administer the VE instance remotely. You can then define virtual servers on the same subnet as the self IP.

     

     

    Aaron
  • Hi Aaron

     

     

     

    thanks for your reply, I have self IP 10.0.0.3, can u tell me how to administer VE instance remotely by using self IP?

     

  • You can use a browser to go to https://10.0.0.3 or an SSH client like Putty to get to the command line. For console access you can use your hypervisor's virtual console.

     

     

    http://the.earth.li/~sgtatham/putty/latest/x86/putty.zip

     

    http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html

     

     

    Aaron
  • thanks Aaron for your help, its working by now

     

     

    but I got another problem when connecting to pool member 202.172.230.136 which has the same address with the application server. Status said its unavailable.

     

     

    when I try to ping from console it didn't get any replies. Is it because its in different subnet with LTM VE so I cannot use it as pool member? Is there any way to make 202.172.230.136 as pool member?

     

  • You'll need a route to hosts on a different subnet than the self IP address. You can configure a TMM route via the GUI under Network >> Routes. Once you have a route, you can configure a remote host as a pool member. You'll want to use SNAT (automap or a SNAT pool) on the virtual server to ensure responses come back to the client via LTM.

     

     

    Aaron
  • hi Aaron

     

     

    I don't know how to configure TMM route but I set up default gateway in Routes and use VLAN as resource now can connect from different subnet. But when configuring pool member, I already set SNAT to automap but when I access virtual server ip, I cannot get response from the server (server not found). How to resolve this?
  • A default gateway in the routes section of the GUI is a TMM route. Can you change it from a VLAN to an actual gateway IP address and retest?

     

     

    Aaron
  • OK change to gateway IP address now can load balance from Pool

     

     

    thanks Aaron for your help