Forum Discussion

Pedro_Haoa_7122's avatar
Pedro_Haoa_7122
Historic F5 Account
Nov 07, 2011

Network Forwarding VS and traffic

Hi,

 

 

This is my first post and i'm having trouble with a network forwarding VS configuration.

 

 

This is the scenario.

 

 

ServerTSM ServerMonitor

 

192.168.8.180/25 192.168.8.190/25

 

| |

 

|

 

VRRP Gateway

 

192.168.8.250

 

|

 

|

 

ExtVLAN

 

192.168.8.240/25

 

LTM

 

192.168.9.120/26

 

IntVLAN

 

|

 

|

 

TSMClient

 

192.168.9.70/26

 

 

There are other VSs configured, but not affect this traffic.

 

LTM Default Gateway: 192.168.8.250

 

TSMClient Default Gateway: 192.168.9.120

 

Default routing behavior.

 

 

I need to pass traffic from the external VLAN to the internal VLAN for Backup & Restore traffic (IBM TSM) and monitoring (SNMP) - Administrative Purpose (Telnet, SSH).

 

So i decided based on F5 literature, that a Network Forwarding VS was the most suitable solution, but it did not work.

 

 

So i did capture traffic to see what was happening. My surprise was that ICMP traffic came and went without any problems on the external VLAN servers, but for some reason, snmp, ssh, telnet traffic, coming through the external VLAN to LTM, exit to the internal VLAN, but did not return any response.

 

 

is correct to thinkthat theNetwork Forwarding VScan solvethis requirement,and if so, what parameters should I look?

 

 

Thanks for all.

 

 

basic
getting started
new to f5

6 Replies

Sort By
  • nitass's avatar
    nitass
    Icon for Employee rankEmployee
    Nov 07, 2011
    for some reason, snmp, ssh, telnet traffic, coming through the external VLAN to LTM, exit to the internal VLAN, but did not return any response.was it syn packet? what bigip platform are you using? if it has pva chip, pva has to be disabled before.

     

     

    sol6546: Recommended methods and limitations for running tcpdump on a BIG-IP system

     

    https://support.f5.com/kb/en-us/solutions/public/6000/500/sol6546.html?sr=17538338
  • Pedro_Haoa's avatar
    Pedro_Haoa
    Ret. Employee
    Nov 07, 2011
    Yes, there is no SYN-ACK from the TSM Client.

     

     

    The platform are two BIG-IP 3600 10.2

     

     

    OK. I'll try with PVA disabled.
  • nitass's avatar
    nitass
    Icon for Employee rankEmployee
    Nov 07, 2011
    I'll try with PVA disabled.3600 platform does not have pva chip.

     

     

    there is no SYN-ACK from the TSM Client.does client send syn-ack? can you check on client machine?
  • Pedro_Haoa's avatar
    Pedro_Haoa
    Ret. Employee
    Nov 07, 2011
    I don't know. I'm afraid that i can't access to the client machine until tomorrow.

     

    I'll try to sniffing the client machine port, and see what's happened with the TCP segment.

     

     

    Any other idea about what can i check or recheck for troubleshooting?

     

  • nitass's avatar
    nitass
    Icon for Employee rankEmployee
    Nov 07, 2011
    what tcpdump command did you use?

     

     

    if nat/snat is not used, can you try this one?

     

    tcpdump -nni 0.0:nnn -s0 -w /var/tmp/output.pcap host x.x.x.x and host y.y.y.y

     

    x.x.x.x is source ip address e.g. tsm server, server monitor

     

    y.y.y.y is destination ip address e.g. tsm client
  • Pedro_Haoa's avatar
    Pedro_Haoa
    Ret. Employee
    Nov 10, 2011
    Hi,

     

     

    Yesterday I tried the Host Forwarding instead of Network Forwarding and after making some troubleshooting, we find that the local Firewall on the client machine was preventing the return of answers to some protocols and IPs, including the forwarding IP.

     

     

    So, I guess that the local Firewalls of the other clients were preventing the Network Forwarding VS receive the response.

     

     

    Thanks for all!!! ;-)