Forum Discussion

Joseph_Wright_1's avatar
Joseph_Wright_1
Icon for Nimbostratus rankNimbostratus
Apr 19, 2005

trunking 2 BigIP 1000's

I am trying to Trunk 2 BigIP 1000's to create one logical switch. The problem I have is that I have multiple VLANS on the switch, so when I try to ping server1 on VLAN1 on switch1 from Server2 on VLAN1 on switch2 I get no response. I have tried to tag the ports but I still have no luck in making this work??? Any Ideas?

 

 

dev
devops
iControl

2 Replies

Sort By
  • Joe_Pruitt's avatar
    Joe_Pruitt
    Apr 20, 2005
    The support for this forum is limited to software questions related to developing iControl applications. I'd recommend looking at the BIG-IP manual and then contacting F5 Product Support directly.

     

     

    F5 Technical Support

     

    Email: support@f5.com

     

    Phone: 206-272-6888

     

    Web: http://www.f5.com/support/

     

    AskF5: http://tech.f5.com/

     

     

    -Joe
  • Keith_Fuller's avatar
    Keith_Fuller
    Icon for Employee rankEmployee
    Apr 22, 2005
    I did this on a Cisco 6509 running old CatOS code and on a 35?? running newer code.

     

     

    Make sure that;

     

     

    1) The switch port has a native VLAN configured

     

    and

     

    2) The native VLAN is NOT one of the VLANs you are tagging on the BigIP interface.

     

     

    Of course, if your switch is Cisco, make sure it is set for 802.1q trunking vice ISL.

     

     

    The native VLAN is the VLAN that is used for all untagged frames in/out of the switch ports, mostly control traffic between switches. I think STP uses the native VLAN.