Forum Discussion
6 Replies
Sort By
- kunjan_118660Cumulonimbus
Don't you have a forwarding virtual server in place for the gateway?
- Richard_GrigsbyNimbostratusthis is a server segment behind the F5. 10.64.7.0/24. The Self IP of the F5 is 10.64.7.1. The Application server initiating the connection out to a host on the other side of the F5 is 10.64.7.174. Source : 10.64.7.174 Destination: 10.250.96.24 TCP/1521 Network 10.250.96.0/24 is a firewalled database segment. Firewall timeouts are as follows: timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 Conn is 60 mins (3600 sec), half-closed is 10 min (600 sec). The idle connection is timing out at 300 seconds. That is why I am looking at the F5 idle timeouts. This
- kunjanNimbostratus
Don't you have a forwarding virtual server in place for the gateway?
- Richard_GrigsbyNimbostratusthis is a server segment behind the F5. 10.64.7.0/24. The Self IP of the F5 is 10.64.7.1. The Application server initiating the connection out to a host on the other side of the F5 is 10.64.7.174. Source : 10.64.7.174 Destination: 10.250.96.24 TCP/1521 Network 10.250.96.0/24 is a firewalled database segment. Firewall timeouts are as follows: timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 Conn is 60 mins (3600 sec), half-closed is 10 min (600 sec). The idle connection is timing out at 300 seconds. That is why I am looking at the F5 idle timeouts. This
- Stanislas_Piro2Cumulonimbus
I ask the same question as kunjan... Don't you have a forwarding virtual server in place for the gateway?
if you use a forwarding virtual server, the profile you must change is the fastl4 profile (or create a new one and change timeout value)
- Richard_GrigsbyNimbostratus
Thank You for your response. I found the Global IP forwarding vs. I did not want to change the global foward-all so I created a new forwarding vs to match just the destination subnet, tcp/1521, and source subnet with an increase idle timeout setting. We will have to monitor to see if it works for us.