VLAN Tagging not working
I have a BIG-IP 11.6.0 (Build 5.123.429 HF5) conencted to a HP HP 5920AF-24XG (Version 7.1.035, Release 2207)
Looking at the F5, packets SEEM to be tagged...
[xxxxxxxx@xxxxxxx:Active:Standalone] ~ tcpdump -ni 2.2 -e tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on 2.2, link-type EN10MB (Ethernet), capture size 96 bytes 14:26:29.559468 00:23:e9:5d:50:0a > Broadcast, ethertype 802.1Q (0x8100), length 46: vlan 30, p 0, ethertype ARP, arp who-has 10.13.6.8 tell 10.13.6.1 14:26:30.002977 d0:7e:28:bc:b6:b3 > 01:80:c2:00:00:00, ethertype 802.1Q (0x8100), length 123: vlan 10, p 0, LLC, dsap STP (0x42), ssap STP (0x42), cmd 0x03: 802.1d unknown version 0x0000: 0180 c200 0000 d07e 28bc b6b3 8100 000a .......~(....... 0x0010: 0069 4242 0300 0003 027c f000 d07e 28bc .iBB.....|...~(. 0x0020: b67e 0000 0000 f000 d07e 28bc b67e 800d .~.......~(..~.. 0x0030: 0000 1400 0200 0f00 0000 4000 4f72 696f ..........@.Orio 0x0040: 6e68 6561 6c74 682d 7361 6173 0000 0000 nhealth-saas.... 0x0050: 0000 .. 14:26:30.149784 00:23:e9:5d:50:0a > Broadcast, ethertype 802.1Q (0x8100), length 46: vlan 30, p 0, ethertype ARP, arp who-has 10.13.6.212 tell 10.13.6.1 14:26:30.255603 00:23:e9:5d:50:0a > Broadcast, ethertype 802.1Q (0x8100), length 46: vlan 30, p 0, ethertype ARP, arp who-has 10.13.6.9 tell 10.13.6.1 14:26:30.316360 00:23:e9:5d:50:0a > Broadcast, ethertype 802.1Q (0x8100), length 46: vlan 30, p 0, ethertype ARP, arp who-has 10.13.6.4 tell 10.13.6.1 14:26:30.346447 00:23:e9:5d:50:04 > Broadcast, ethertype 802.1Q (0x8100), length 46: vlan 10, p 0, ethertype ARP, arp who-has 10.13.0.25 tell 10.13.0.1 14:26:30.351616 00:23:e9:5d:50:04 > Broadcast, ethertype 802.1Q (0x8100), length 46: vlan 10, p 0, ethertype ARP, arp who-has 10.13.0.77 tell 10.13.0.1 14:26:30.364972 00:23:e9:5d:50:04 > Broadcast, ethertype 802.1Q (0x8100), length 46: vlan 10, p 0, ethertype ARP, arp who-has 10.13.0.44 tell 10.13.0.1 14:26:30.368736 00:50:56:a6:3a:ca > Broadcast, ethertype 802.1Q (0x8100), length 64: vlan 10, p 0, ethertype ARP, arp who-has 10.13.0.44 tell 10.13.0.13
however the switch isn't seeing the MAC's...
[xxxxx]display mac-address interface Ten-GigabitEthernet 1/0/9
MAC Address VLAN ID State Port/NickName Aging [xxxxx]display mac-address interface Ten-GigabitEthernet 2/0/9
MAC Address VLAN ID State Port/NickName Aging [xxxxx]display mac-address interface Bridge-Aggregation 7
MAC Address VLAN ID State Port/NickName Aging [xxxxx]
The switch can see other MAC's on the VLAN...
[xxxxx]display mac-address vlan 30 MAC Address VLAN ID State Port/NickName Aging
0050-5694-14c0 30 Learned BAGG3 Y
0050-5694-20f1 30 Learned BAGG3 Y
0050-5694-363b 30 Learned BAGG4 Y
0050-5694-3bab 30 Learned BAGG4 Y
0050-5694-407d 30 Learned BAGG4 Y
any thoughts on where to look next?
Thanks
SHANE