Forum Discussion

mundofer_338665's avatar
mundofer_338665
Icon for Nimbostratus rankNimbostratus
Nov 28, 2017
Solved

Shared SNAT and pool in a LTM?

We have a LTM with several virtual servers. All the virtual servers,the destination servers and the SNAT address are in the same IP network 10.220.2.0/23 I have two beginner questions: - Can I have only one SNAT pool and share it between the virtual servers?. - Can two or more virtual servers reference and use the same destination pool through an iRule?. Thanks

 

devops
LTM
  • eey0re_68979's avatar
    eey0re_68979
    Nov 29, 2017

    Hi, and welcome. Yes, your SNAT pool can be used by many Virtual Servers - or you could just use 

    SNAT Automap
    on each Virtual Server and not bother configuring a SNAT pool. (The Self IP(s) will be used instead.)

    Pools can be (and often are) used by many different Virtual Servers. There is no need for an iRule to do this.

3 Replies

Sort By
  • eey0re_68979's avatar
    eey0re_68979
    Icon for Altocumulus rankAltocumulus
    Nov 29, 2017

    Hi, and welcome. Yes, your SNAT pool can be used by many Virtual Servers - or you could just use 

    SNAT Automap
    on each Virtual Server and not bother configuring a SNAT pool. (The Self IP(s) will be used instead.)

    Pools can be (and often are) used by many different Virtual Servers. There is no need for an iRule to do this.

    • Andy_McGrath's avatar
      Andy_McGrath
      Icon for Cumulonimbus rankCumulonimbus
      Nov 29, 2017

      If you use SNAT Automap the F5 will use the floating Self-IP associated with the egress VLAN