Two Health Monitor One Failing Pool is down.

Why would the entire pool be down if only one health monitor is failing?

 

How can i change it so the pool is not down when only one health check is failing but would go down if both are failing.

 

2 node

 

MON-CC01 MON-CC02

 

2 ports

 

8665 8666

 

2 nodes:

 

• Green MON-CC0X
• Red MON-CC0X

Each node has a custom health monitor:

 

• MON-CC01-866X

   

  • NameMON-CC01-866X
  • Partition / PathCommon
  • Description
  • TypeTCP
  • Parent Monitortcp
  • Interval 5 seconds
  • Timeout16 seconds
  • Send String
  • Receive String
  • Receive Disable String
  • Reverse Yes X No
  • Transparent Yes X No
  • Alias Address 10.51.76.42
  • Alias Service Port 866X
  • Adaptive Enabled

2 Pool

 

• Red MON-CC-866X-Pool
• Red MON-CC-866X-Pool

Both Pools are red

 

Looking at the members of each pool i see the following:

 

• Node NameMON-CC0X
• Address10.51.76.41
• Service Port8665
• Partition / PathCommon
• Description
• Parent Node MON-CC0X
• Availability Offline (Enabled) /Common/MON-CC0X-866X: Could not connect.; No successful responses received before deadline. @2018/01/17 13:15:58.
• Health Monitors
  • Green MON-CC01-866X
  • Red MON-CC02-866X
• Monitor Logging X Enable
• Current Connections0
• State
  • X Enabled (All traffic allowed)
  • Disabled (Only persistent or active connections allowed)
  • Forced Offline (Only active connections allowed)
• Ratio 1
• Priority Group 0
• Connection Limit 0
• Connection Rate Limit 0
• Health Monitors Inherit From Pool
• IP Encapsulation Inherit From Pool