Forum Discussion

Russell_77729's avatar
Russell_77729
Icon for Nimbostratus rankNimbostratus
Feb 10, 2015

Advertised route via OSPFv2

We use the advanced routing module (a module I'm not familiar with) in the F5 to advertise routes via OSPFv2 to to a network that uses the F5 as the default gateway. There are two Forwarding (IP) vi...
application delivery
deployment
design
LTM
TMSH
shaggy's avatar
shaggy
Icon for Nimbostratus rankNimbostratus
Feb 10, 2015

can you provide the output from the tmsh command 

list ltm virtual-address 192.168.86.0 all-properties
?

I want to see what traffic-group the network virtual-address is associated with.

  • Russell_77729's avatar
    Russell_77729
    Icon for Nimbostratus rankNimbostratus
    Feb 10, 2015
    ltm virtual-address 192.168.86.0 { address 192.168.86.0 app-service none arp disabled auto-delete true connection-limit 0 description none enabled yes floating enabled icmp-echo disabled inherited-traffic-group false mask 255.255.255.0 metadata none partition Common route-advertisement enabled server-scope none traffic-group traffic-group-1 unit 1 }
  • shaggy's avatar
    shaggy
    Icon for Nimbostratus rankNimbostratus
    Feb 10, 2015
    can you post the same config from the standby unit?
  • Russell_77729's avatar
    Russell_77729
    Icon for Nimbostratus rankNimbostratus
    Feb 10, 2015
    That was the standby unit, here is the active unit. ltm virtual-address 192.168.86.0 { address 192.168.86.0 app-service none arp disabled auto-delete true connection-limit 0 description none enabled yes floating enabled icmp-echo disabled inherited-traffic-group false mask 255.255.255.0 metadata none partition Common route-advertisement enabled server-scope none traffic-group traffic-group-1 unit 1 }