Forum Discussion
Hi Yannick,
This should help. https://www.cisco.com/c/dam/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/solution-overview-c22-732522.pdf
Regards
Eben.
Hello,
Thanks for this document. However it does not seem to contain any information on how he Viprion is set up on the N9K.
What supposed to be the MTU size between the devices etc. I did notice that 1 viprion chassis in Active and the other one is in Standby. In our design both chassis are active active and the VCMP's are spread across the 2 chassis's.
Also we have no lldp enabled on the ports towards the F5 from the nexus.
I noticed in the CLI that the physical interface of the F5 towards the Nexus has an MTU of 9198. The Nexus has an MTU of 1500 configured on the LACP port-channel, however the vlan's that are configured on the Viprion are also 1500.
A portion of our DMZ setup is also connected with 40Gig to the Viprion with a Cisco Cat 6500 and there are no issues. It really looks like a vPC specific towards the Viprion