Forum Discussion
Andy_McGrath
Oct 01, 2018Cumulonimbus
-
I would start with Standard VS and ensure it is working first. Later you can change to Performance Layer 4.
-
-
-
Yes, under the pool set the pool members service port to be * (Any/All Services) then for the Virtual Server set the Service Port to also be * (Any/All Ports)
-
Host route is just a route for a /32 or a single IP address, not knowing your network setup you may not need this as you might not needs this. Basically you need to ensure client connection requests to the Virtual Server Address are routed to the F5 VLAN X.