NimbostratusAn IP forwarding virtual server will never look at the pool/node you set in an irule. It will perform a routing lookup and based on the answer it will forward the traffic.
Ok, create two performance L4 virtual servers in the Prod partition. Destination IP is 16.15.19.33, pool with 10.17.131.1 as a member. Add the ip address of first server as source to the first created virtual server and the second ip to the second virtual server. (assign the correct SNAT pool to both virtual servers)
Repeat this in the UAT partition but use 10.17.7.1 as the pool member.
This will solve your routing issue.
Cheers,
Kees
NimbostratusHi Kees,
Thanks for the reply. I have set this up following your steps but the Servers are not sending the traffic to the FW interface now i.e. not leaving the F5 even though I am showing traffic on the VIP Stats. Any thoughts would be appreciated. Thanks.
NimbostratusSo just FYI, this is a bi-directional traffic flow. Inbound connection will hit the same VIP, 10.17.131.103 for Prod and 10.17.7.106 UAT which are being used as SNAT Pool for outbound connection from the server through F5. Sorry for the hassle but I am surprised to see the struggle we are going through to set this up for the last 3 weeks. Any help would be appreciated. Thanks.
