Forum Discussion

Samit_jadhav_33's avatar
Samit_jadhav_33
Icon for Nimbostratus rankNimbostratus
Nov 27, 2018

Probe query

If the front end and backend virtual port has the port set to tcp 8569 then how we could test whether the connection works?   Probe port tcp 8569 Virtual port tcp 8569 Service port tcp 8569   ...
application delivery
LTM
mplaksin_293271's avatar
mplaksin_293271
Icon for Nimbostratus rankNimbostratus

When you say If the front end and backend virtual port ... You are talking about virtual server?. I not so sure about the answer. The TCP probe has to be in the pool. In LTM--> Monitor you have the options of the monitor, including the interval used to probe.

 

Interval5 seconds Timeout16 seconds Send String Receive String Receive Disable String ReverseNo TransparentNo Alias Address* All Addresses Alias Service Port* All Ports AdaptiveDisabled

 

mplaksin_293271's avatar
mplaksin_293271
Icon for Nimbostratus rankNimbostratus
Nov 27, 2018

Yes, with ssh for example

 

GO TO BASH: @(f5-)(cfg-sync Standalone)(/S2-green-P:Active)(/Common)(tmos) bash Execute the command: [@f5-:/S2-green-P:Active:Standalone] ~ telnet 80 Trying 151.101.217.164... Connected to . Escape character is '^]'.

 

Use RDexec if you have to specify the route domain:

 

[:/S2-green-P:Active:Standalone] ~ rdexec 12 telnet 10.10.50.14 443 Trying 10.10.50.14... Connected to 10.10.50.14. Escape character is '^]'.