Redirect From port :80 to :8000

I have no configuration control over the peoplesoft application.

 

I am in the networking Group and only have access to the Cisco CSM's and the F5. Let me give you some more information and see if its makes it any clearer.

 

 

 

Here is the CSM config. This work normally without problems. No Port :8000 required on the end of the VIP

 

 

serverfarm PEOPLESOFT

 

nat server

 

nat client VLAN2-POOL

 

predictor leastconns

 

failaction purge

 

real 192.168.9.189 8000

 

inservice

 

real 192.168.9.190 8000

 

inservice

 

health retries 30 failed 5

 

probe HTTP-8000

 

!

 

 

!

 

vserver PS-SERVER

 

virtual 192.168.8.18 any

 

serverfarm PEOPLESOFT

 

sticky 5

 

replicate csrp connection

 

persistent rebalance

 

inservice

 

!

 

 

 

This is the config as it is on the F5. Only way to get this to work is to use :8000 after the VIP.

 

 

 

pool PEOPLESOFT {

 

lb method member least conn

 

action on svcdown reset

 

monitor all HTTP-8000 and HTTP

 

members {

 

192.168.9.189:8000 {}

 

192.168.9.190:8000 {}

 

}

 

}

 

 

virtual PS-SERVER {

 

mirror enable

 

snatpool VLAN2_SNAT

 

pool PEOPLESOFT

 

destination 192.168.8.18:any

 

persist source_addr-5

 

profiles fastL4-CSM {}

 

}

 

 

snatpool VLAN2_SNAT {

 

members {

 

192.168.8.77

 

192.168.8.78

 

192.168.8.79

 

}

 

}

 

monitor HTTP {

 

defaults from http

 

dest *:http

 

}

 

monitor HTTP-8000 {

 

defaults from http

 

dest *:8000

 

}

 

 

The goal is to use the VIP without :8000 at the end of it.