Forum Discussion
KMA_50449
Jul 16, 2008Nimbostratus
Dears,
First thanks for your quick answer.
The webserver is a linux, with 3 IP on the same VLAN, same subnet.
The first 2 IP's are used in npath routing, so they are mount directly on the loopback interface, so that the default gw is one of our router.
It works for months very fine with the LTM
The third IP is on it's own interface, dedicated for SSL, and I've tried to setup the route on the webserver with ip route tools, but I never succeed, the packet from these 3rd interface never go trough the LTM
If someone knows howto do it, i'm very interested, because SNAT will consume a lot of ressource whereas setting default gw will not consume anything on the LTM.
I've tried to enable SNAT automap AND checked address translation, and it works. I miss those two options.
Thanks a lot Aaron
K.