MustphaBassim
Cirrus
CirrusSSL handshake failed
Hello Dears
I noticed on the log there are many SSL handshake failed with my virtual server so any advise about how to solve the issue.
Bests
Forum Discussion
5 Replies
Hello,
Please check the below link:
When experiencing SSL handshake failures issues, you can use the following troubleshooting steps to determine the root cause:
- Identifying SSL handshake failures
- Enabling SSL debug logging
- Testing SSL connections (using s_client)
- Reviewing log messages related to SSL handshake failures
- Packet tracing using the ssldump utility
boneyardMVP
Lots of good advice, specially the whole list from Mohamed_Salah_
There is a good chance you have quite some of them, where it is the other side (the client) which causes them. Make sure you focus on the ones you see a lot or able to solve with the client side. Also keep in mind with an internet connected ADC you will see lots of bots and scans which trigger these.
- PhatANhappy
COMPLETELY AGREE. This is something to chase if its part of an active troubleshooting process where you following a known source. Odds are this is either on the internet OR being monitored /probed by a tool that is not correctly setup. I get thousands of these per day. I chased them once with the links provided by Mohamed - and not a one of my finding came back to real traffic flows.
mihaicCan you share the logs?
zamroni777Cumulonimbus
capture the tcpdump and open the result in wireshark.
the detail of ssl/tls session setup can be easily seen in wireshark
