Forum Discussion
fkuser_104673
Aug 04, 2009Nimbostratus
I'm not using CMP. As I said, I'm using the 9.4.7 software version. Here is the information you asked me.
VIRTUAL ADDRESS 1.x.x.85 UNIT 1
| ARP enable
| (cur, max, limit, tot) = (77, 145, 0, 489122)
| (pkts,bits) in = (8.489M, 26.00G), out = (9.455M, 71.91G)
+-> VIRTUAL virtual_443 SERVICE https
| PVA acceleration none
| (cur, max, limit, tot) = (74, 124, 0, 140736)
| (pkts,bits) in = (6.218M, 23.99G), out = (7.247M, 55.81G)
| requests (total) = 2.040M
+-> RULE iRule
+-> HTTP_REQUEST 1136756 total 1 fail 0 abort
+-> LB_SELECTED 756626 total 0 fail 0 abort
+-> POOL pool_80 LB METHOD observed MIN/CUR ACTIVE MEMBERS 0/4
| (cur, max, limit, tot) = (0, 23, 0, 23062)
| (pkts,bits) in = (147439, 139.3M), out = (111301, 517.2M)
+-> POOL MEMBER pool_80/1.x.x.51:http active,up
| | session enabled priority 1 ratio 1
| | (cur, max, limit, tot) = (0, 6, 0, 5658)
| | (pkts,bits) in = (39522, 36.22M), out = (28880, 95.32M)
| | requests (total) = 5659
+-> POOL MEMBER pool_80/1.x.x.78:http active,up
| | session enabled priority 1 ratio 1
| | (cur, max, limit, tot) = (0, 7, 0, 7517)
| | (pkts,bits) in = (52298, 47.80M), out = (37482, 126.2M)
| | requests (total) = 7519
+-> POOL MEMBER pool_80/1.x.x.84:http active,up
| | session enabled priority 1 ratio 1
| | (cur, max, limit, tot) = (0, 5, 0, 6826)
| | (pkts,bits) in = (38090, 38.89M), out = (30909, 205.3M)
| | requests (total) = 6902
+-> POOL MEMBER pool_80/1.x.x.84:http active,up
| session enabled priority 1 ratio 1
| (cur, max, limit, tot) = (0, 5, 0, 3061)
| (pkts,bits) in = (17529, 16.42M), out = (14030, 90.26M)
| requests (total) = 3085
pool pool_80 {
lb method observed
monitor all HTTP
partition someone
members
1.x.x.51:http
1.x.x.78:http
1.x.x.84:http
1.x.x.84:http
}
The persistence profile configuration is the default one for a source address persistence.