Nimbostratus
Nimbostratus
============================
3.ucs no-license no-platform-check tmsh load /sys ucs au01ulb022qanb2-17-04-201
Processing UCS file: /var/local/ucs/test-17-04-2013.ucs
Installing full UCS (10.2.4) data, excluding license file.
Saving active configuration...
The hostname is set to test.x.x.x.x
Extracting manifest: /var/local/ucs/test-17-04-2013.ucs
Product : BIG-IP
Platform: C113
Version : UCS : 10.2.4
System: 11.3.0
Edition : UCS : Hotfix HF3
System: Final
Hostname: au01ulb022qanb2.eqp.qantas.com.au
Installing --full-- configuration on host test.x.x.x
Installing configuration...
ATTENTION REQUIRED:
Your previous configuration files have been archived, as listed
below. If you customized any settings in these files before
upgrading, you will need to manually restore those changes by
using the Configuration utility or Traffic Management Shell (tmsh).
Archiving /config/wa/globalfragment.xml.10.2.4
Archiving /config/wa/pvsystem.dtd.10.2.4
Archiving /config/wa/pvsystem.conf.10.2.4
Archiving /config/wa/transforms/common.zip.10.2.4
Post-processing...
Reloading License and configuration - this may take a few minutes...
Configuration loading error: high-config-load-failed
For additional details, please see messages in /var/log/ltm
WARNING: There were one or more errors detected during installation.
Check the error messages and take the proper actions if needed.
ERROR: UCS installation failed.
Operation aborted.
[root@test:Active] ucs
=================================
If I try the following then it seem working.
[root@test:Active] ucs /usr/libexec/bigpipe daol
Reading configuration from /config/bigpipe/low_profile_base.conf.
Reading configuration from /config/bigpipe/config_base.conf.
Reading configuration from /config/bigpipe/bigip_sys.conf.
Reading configuration from /config/bigpipe/bigip_base.conf.
Reading configuration from /config/bigpipe/base_monitors.conf.
Reading configuration from /config/bigpipe/profile_base.conf.
Reading configuration from /config/bigpipe/daemon.conf.
Reading configuration from /config/bigpipe/bigip.conf.
Reading configuration from /config/bigpipe/bigip_local.conf.
Loading the configuration ...
[root@test:Active] ucs
=============
Quetion : what could related to Configuration loading error: high-config-load-failed ? It seem like WebAccelerator class and policy not load properly. Is there any command to fix it ?
Thanks