arpydays
Jul 01, 2016Nimbostratus
Forwarding VS and Route Domains
Hi,
I have an LTM setup with 2 RDs, RD0 and RD1. Both RDs have default routes to their respective gateways, all tested and working.
I have configured an IP Forwarding VS in RD0 listening on 0.0.0.0/0 and have a SNAT pool in RD1 associated with the VS. I want traffic to flow through the VS in RD0 and egress RD1. When I test this it doesn't work and I get a RST. If I make TWO change to the config to validate connectivity it works, the two changes are 1) change VS to L4 Perf and add pool with default gateway as pool member. So I've validated that the SNAT pool works etc. When I look at a low level tcpdump I see the follow RST cause in the trace…
rst_cause="[0x23e4909:259] No available SNAT addr" peerremote=00000000:00000000:00000000:00000000 peerlocal=00000000:00000000:00000000:00000000 remoteport=0 localport=0 proto=0 vlan=0
Any ideas why this wouldn't work? Using v12.1hf1