Hi,
We have recently setup VIP for ftp connections through F5. We are having issues when user is trying to access ftp using filezilla client (in both active and passive modes) . Is it possible t...
Yes Brad,
Session is timing out and I have tried allowing data-port 20 and 0. Both gave me same results.
virtual config
ltm virtual vs_test01_ {
auto-lasthop enabled
destination x.x.x.2:ftp
ip-protocol tcp
mask 255.255.255.255
partition Corp_Non-prod
pool pl_test01
profiles {
/Common/tcp { }
ftp_test { }
}
source 0.0.0.0/0
source-address-translation {
type automap
}
vs-index 92
}
Thanks,
Sekhar
What is timing out exactly? The opening of the control channel? The opening of the data channel? or is it timing out while a file is being transferred?
after initializing tls command on filezilla client time outs intially it retries again and fails.. this is the output on zilla client
Status:Connecting to x.x.x.2:21...
Status:Connection established, waiting for welcome message...
Status:Initializing TLS...
Error:Connection timed out after 20 seconds of inactivity
Error:Could not connect to server
Status:Waiting to retry...
Status:Connecting to x.x.x.2:21...
Status:Connection established, waiting for welcome message...
Response:220-Welcome to FTP!
Response:220 CrushFTP Server Ready!
Command:AUTH TLS
Response:234 Changing to secure mode...
Status:Initializing TLS...
Error:Connection timed out after 20 seconds of inactivity
Error:Could not connect to server
Status:Disconnected from server
Thanks,
Sekhar