Forum Discussion

Lions_229232's avatar
Lions_229232
Icon for Nimbostratus rankNimbostratus
Jan 10, 2016

LTM config issue

Hi, I am having an issue and would like your help on this. Below is my LTM network topology and it's working, but I am having one NEW issue when creating a new network (10.4.0.0/24) for another set o...
application delivery
LTM
BinaryCanary_19's avatar
BinaryCanary_19
Historic F5 Account

Is the LTM connected to the same LAN segment as the servers on 10.4.0.0/24 ?

 

Also, this may seem trivial, but windows servers tend to not respond to ping by default, so make sure that this is not your problem (you can test http connection instead)

 

Lions_229232's avatar
Lions_229232
Icon for Nimbostratus rankNimbostratus
Jan 11, 2016
Hi The LTM is connected to the same LAN segment 10.4.0.0/24, the same way I setup for 10.2.0.0/24 ( this one is working for ping, ltm config, access, etc, happy). I ignored the ping issue on the LTM for now, but when I tried to add a new node using 10.4.0.0/24, LTM monitoring failed, right away I know something was not right. If you look at configs that I posted earlier, I added 10.4.0.0/24 on the internal interface, but that did not do any good. Any thoughts?